Sterling 360 Скачать руководство пользователя страница 81

Страница: 81 / 213

7-13

2. Shut down the engine by turning the ignition

switch to the “ACC” position.

P. 5-12

3. To protect against battery discharge, remove the

ignition key before you exit.

4. To help prevent theft, be sure the doors are

locked before leaving the vehicle.

CAUTION

•

Do not leave the vehicle sitting for a long

time with the ignition switch in the “ON” or

“ACC” position. This could discharge the

battery.

•

Be sure to turn off all lights after parking to

prevent discharging the battery.

5. If parking on a slope is unavoidable, chock all

the tires securely and turn the wheels in the

direction of roll. Take any other necessary mea-

sures to prevent the vehicle from moving.

WARNING

Brake faults that would cause the

warn-

ing light to illuminate have no effect on the

parking brake. If the

warning light illumi-

nates, the parking brake will stop the vehicle

if necessary and prevent an injury accident.

Содержание 360






















































































































































































































Результаты поиска

Содержание 360

Отзывы:

Бренды по названию

Популярные бренды

Sterling 360, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание 360

Отзывы:

Бренды по названию

Популярные бренды