Sterling 360 Скачать руководство пользователя

Страница: 105 / 213

10-2

In cold weather

•

When vehicles are shipped from the factory,

long-life diesel coolant is added to the vehicle

cooling system.

•

This coolant contains corrosion-inhibiting anti-

freeze to protect the cooling system. For added

safety, have an authorized Sterling service facil-

ity check that the coolant mixing ratio is correct

before the onset of winter.

•

Be sure to use fully-formulated antifreeze with

corrosion inhibitors and add it in the correct mix-

ing ratio.

P. 11-33

CAUTION

Never mix brands of antifreeze or anti-corrosion

additives. This can cause the coolant to perform

poorly. If a different coolant additive has been

used, be sure to thoroughly flush the cooling

system before adding a new brand of coolant.

At low temperatures, the viscosity of engine oil

increases. This can make it hard to start the engine,

especially early in the morning. Therefore, choose

engine oil with a viscosity that is appropriate for the

weather conditions.

P. 11-17

Ordinary summer-grade (2-D) diesel fuel reaches

its cloud point in freezing weather, making it impos-

sible to start the engine.

If you are heading to a cold-weather area, fuel your

vehicle with 1-D or winterized 2-D diesel fuel as

soon as possible.

P. 1-5

NOTE:

Fuel cloud point is the temperature at which wax

crystals become visible, which is generally above

the pour point of the fuel. To keep the fuel filter ele-

ments from plugging with wax crystals, the cloud

point must be lower than the lowest starting temper-

ature the engine will face

Coolant

Engine oil

Fuels

Z10758

Содержание 360






















































































































































































































Результаты поиска

Содержание 360

Отзывы:

Похожие инструкции для 360

Бренды по названию

Популярные бренды

Sterling 360, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание 360

Отзывы:

Похожие инструкции для 360

Бренды по названию

Популярные бренды