Sterling 360 страница 130 Скачать руководство пользователя

Страница: 130 / 213

11-22

Pretrip inspection and maintenance

3 Automatic transmission fluid

Recommended fluid:

Automatic transmission fluid

(Exxon Mobil: Mobil ATF3309 or equivalent)

Have automatic transmission fluid (ATF) changed

by an authorized Sterling service facility.

Check the fluid level when the fluid is at operating

temperature. Use the “HOT” range on the ATF dip-

stick .

NOTE:

The “COLD” range is for reference purposes when

the oil temperature is low. Accurate measurement is

not possible at low temperatures.

1. Park the vehicle on a level surface. Set the park-

ing brake and chock all the tires, fore and aft.

2. Start the engine. With the engine at idle and the

brake pedal depressed, select each gear range

in turn. When finished, leave the shift selector in

“P” (park).

Remove the ATF dipstick and wipe it clean with a

shop towel.

NOTE:

The ATF dipstick is located behind the cab. If it is

difficult to remove, tilt the cab.

3. Fully insert the dipstick into the gear case, and

slowly draw it out.

4. The fluid level that appears on the dipstick

should be between the two notches in the “HOT”

range.

5. If the fluid level is too low, add fluid through the

dipstick guide tube .

NOTE:

•

Always check fluid level with the engine at idle.

•

The fluid level rises as the fluid heats up.

Inspection interval

Every 6000 miles

(10 000 km)

Replacement interval

Every 24,000 miles

(40 000 km)

WARNING

Use extreme care when tilting the cab with

the engine running. If the engine is running,

the vehicle could move, causing an accident

that could result in personal injury or prop-

erty damage

After lowering the cab, check that it is locked

securely in position.

P. 11-5

Z12049a

Содержание 360






















































































































































































































Результаты поиска

Содержание 360

Отзывы:

Похожие инструкции для 360

Бренды по названию

Популярные бренды

Sterling 360, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание 360

Отзывы:

Похожие инструкции для 360

Бренды по названию

Популярные бренды