Sterling 360 Скачать руководство пользователя

Страница: 80 / 213

7-12

Starting and driving

CAUTION

Never leave lighters, cans of carbonated drink,

and eyeglasses in the cab when parking the

vehicle in hot sunshine. The cab will become

extremely hot, so lighters and other flammable

items may catch fire and unopened drink cans

may rupture. The heat may also damage plastic

eyeglass lenses and other plastic parts.

NOTE:

•

When you cannot avoid parking on a slope, set

the parking brake and chock all the wheels. Turn

the wheels into the curb in the direction of roll.

•

Always set the parking brake whenever you park

the vehicle. Do not assume that putting the shift

selector in “P” (park) will hold the vehicle

sure the parking brake is applied fully.

1. <manual transmission> Put the shift lever in

neutral with the vehicle not moving. Set the

parking brake.

<automatic transmission> Set the parking brake

with the brake pedal depressed. Then move the

shift selector to “P” (park).

Parking

WARNING

•

Park the vehicle on a level surface, if avail-

ble. Avoid parking on slopes. The vehicle

could roll and cause an injury accident.

•

The engine and exhaust pipe are

extremely hot immediately after the vehi-

cle has been driven. Do not park the vehi-

cle in any place where there is dry grass,

waste paper, or other flammable material.

This could cause a fire, resulting in burn

injuries or loss of life.

•

Always shut down the engine before

sleeping in the cab. You could cause an

injury accident by unintentionally moving

the accelerator pedal or shift lever while

sleeping. Diesel exhaust will replace the

breathable air within an enclosed space,

possibly resulting in unconsciousness or

death.

•

Before opening either door, check the mir-

rors to be sure it is safe. Suddenly open-

ing a door may cause an injury to drivers,

motorcyclists, bicyclists, and pedestrians.

Содержание 360






















































































































































































































Результаты поиска

Содержание 360

Отзывы:

Похожие инструкции для 360

Бренды по названию

Популярные бренды

Sterling 360, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание 360

Отзывы:

Похожие инструкции для 360

Бренды по названию

Популярные бренды