Sterling 360 Скачать руководство пользователя

Страница: 194 / 213

12-20

In an emergency

2 Front and side turn signal bulb replace-

ment

1. Open the door.

2. Turn the bulb fixture counterclockwise (in the

direction of arrow ) to remove it from the vehi-

cle.

3. Press in the bulb and turn it clockwise (in the

direction of arrow ) to remove it from the fix-

ture.

4. Install the bulb and turn it counterclockwise until

seated.

5. Insert the fixture into the vehicle and turn it until

it catches. Tug gently on the fixture to make sure

the bulb is locked in position.

6. If the packing is dirty, clean it.

3 Dome light bulb replacement

1. Insert a flat-blade screwdriver into the

notches and use it to release the tabs on

the bottom of the lens . Remove the lens.

2. Push the bulb retainer in the direction of the

arrow and remove the bulb .

3. To install the lens, insert the tabs on the bot-

tom of the lens, align the tabs on the top of the

lens, and press the lens into place.

4 Replacing other lights

1. Loosen the lens retaining screws (the screws

that secure the lens to the fixture). Then remove

the lens from its fixture.

2. Turn the bulb counterclockwise while pressing in

until it can be removed.

3. Insert a new bulb and turn it clockwise.

4. Fit the lens onto the fixture.

5. Ensure that the packing is correctly positioned.

If the packing is incorrectly installed, water can

enter the fixture and shorten its life. If the pack-

ing is dirty, clean it.

6. Tighten the lens retaining screws until firm.

Z11278

Z11279

Содержание 360






















































































































































































































Результаты поиска

Содержание 360

Отзывы:

Похожие инструкции для 360

Бренды по названию

Популярные бренды

Sterling 360, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание 360

Отзывы:

Похожие инструкции для 360

Бренды по названию

Популярные бренды