Sterling 360 Скачать руководство пользователя

Страница: 156 / 213

11-48

Pretrip inspection and maintenance

1 Prepare for tire replacement

NOTE:

If you get a flat tire while on the road and need to

change it right away, pull the vehicle to the side of

the road as soon as it is safe to do so. Turn on the

hazard flashers and set up a reflective triangle or

flare behind the vehicle.

1. Park the vehicle on a level surface. Set the park-

ing brake.

2. On vehicles with manual transmission, place the

shift lever in neutral.

On vehicles with automatic transmission, place

the shift selector in “P” (park).

3. Shut down the engine.

4. Have all passengers get out of the vehicle.

5. Chock the tire diagonally opposite to the tire to

be replaced. Set chocks fore and aft.

Example

If the right rear tire is to be replaced, chock the

left front tire fore and aft.

6. Obtain a replacement tire.

NOTE:

•

Your vehicle is not provided with a replacement

tire as standard equipment.

•

See the table for a list of approved tires:

2 Vehicle jacking points

2.1

Front axle

•

Bottom surface of the leaf spring behind the tie

rod.

CAUTION

Apply the jack only to the designated jacking

points. Applying the jack elsewhere could dam-

age the vehicle and cause the jack to slip out of

position.

Tire replacing

Model

Tire size

COE 40, 45

LT215/85R16-10PR

(Load Range E)

COE 50

215/75R17.5 124/123L

(Load Range F)

Z12085

Содержание 360






















































































































































































































Результаты поиска

Содержание 360

Отзывы:

Похожие инструкции для 360

Бренды по названию

Популярные бренды

Sterling 360, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание 360

Отзывы:

Похожие инструкции для 360

Бренды по названию

Популярные бренды