Sterling 360 Скачать руководство пользователя

Страница: 68 / 213

6-12

Instrument cluster gauges and lights

10 Automatic transmission warning

The automatic transmission warning illuminates as

a bulb check when the ignition key is turned to

“ON.” It should go out in a few seconds.

If the light illuminates while driving, there is a fault in

the electronic control system of the automatic trans-

mission. Stop the vehicle in a safe place, shut down

the engine, and keep the ignition switch in “ACC” or

“LOCK” for 5 seconds or longer, if necessary to

reset the computer. Then restart the engine.

If the fault does not clear, or the light soon comes

back on, have the vehicle checked by an authorized

Sterling service facility.

Even with a fault in the electronic control system,

the vehicle can still be driven in a “derate” mode.

In the “derate” mode, not all gears will be available.

See the table below for more information.

11 Coolant temperature warning

The coolant temperature warning illuminates if the

engine overheats. With the engine overheated, the

needle in the coolant temperature gauge is in the

red zone.

Stop the vehicle promptly. Use the engine idle con-

trol to run the engine at a speed slightly higher than

normal idle. This allows the engine to cool. When

the gauge needle comes down to near the center of

the scale, shut down the engine and perform the

checks and corrective actions described under “If

the engine overheats” on this reference page:

P. 12-7

CAUTION

Do not shut down the engine right away. Let it

run at a speed slightly above normal idle. If the

engine is shut down immediately after stopping,

the coolant temperature will rise quickly and

may cause the engine to seize.

Shift

selector

position

Derate mode

gear

Normal gear(s)

Park

Reverse

Neutral

At high speeds

limited to 5th.

At low speeds,

or after one

stop, limited to

3rd.

1st through 6th

1st through 3rd

only

1st through 2nd

only

WARNING

Driving with an overheated engine could

cause a fire, leading to burn injuries or loss

of life.

Z10839

Z10486

Содержание 360






















































































































































































































Результаты поиска

Содержание 360

Отзывы:

Похожие инструкции для 360

Бренды по названию

Популярные бренды

Sterling 360, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание 360

Отзывы:

Похожие инструкции для 360

Бренды по названию

Популярные бренды