Sterling 360 Скачать руководство пользователя

Страница: 167 / 213

11-59

3 Cleaning the terminals

1. Remove any corrosion with a wire brush, and

wash with a weak solution of baking soda and

water. Rinse with clean water and dry.

2. To provide corrosion protection, apply pumpable

dielectric grease to the battery terminals.

4 Charging a battery

NOTE:

If the battery is cold, let it warm up. This will allow a

normal charging rate.

1. Remove the battery from the vehicle and

remove the vent plugs from the battery.

2. Make sure the charger is turned off.

3. Connect the charger, following the charger man-

ufacturer’s instructions. Rock the charger lead

clamps to make sure there is a good connection.

4. Turn on the charger and slowly increase the

charging rate until the recommended value (in

amps) is reached.

CAUTION

If the battery feels hotter than 125

F (52

C), or if

rapid gassing or spewing of electrolyte occurs,

lower the charging rate or stop charging the bat-

tery and allow it to cool.

5. After the battery has charged for the recom-

mended period of time, turn the charger off.

6. Disconnect the charger from the battery.

7. Install the vent plugs in the battery and install

the battery on the vehicle.

8. Attempt to start the vehicle. If the engine does

not crank, replace the battery with a new one.

NOTE:

Follow the correct procedure when jump starting a

vehicle with a dead battery.

P. 12-22

5 Removing the batteries

1. Disconnect the battery cables (each indicated

by an arrow

in the illustration) from the bat-

tery terminals. On each battery, disconnect the

negative (–) terminal first.

WARNING

If a metal object connects an ungrounded

battery terminal to a nearby metal part of the

vehicle which is grounded, it could short out

the batteries, causing sparks and possible

property damage.

Z15057

Содержание 360






















































































































































































































Результаты поиска

Содержание 360

Отзывы:

Похожие инструкции для 360

Бренды по названию

Популярные бренды

Sterling 360, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание 360

Отзывы:

Похожие инструкции для 360

Бренды по названию

Популярные бренды