Sterling 360 Скачать руководство пользователя страница 59

Страница: 59 / 213

6-3

CAUTION

The term “overspeed condition” is used when

engine speed (RPM) exceeds the maximum safe

limit. This can occur when the engine is driven

by the wheels during downhill driving or down-

shifting.

Persistent engine overspeed can cause an

engine breakdown.

This gauge indicates the temperature of the engine

coolant.

With the engine operating normally, the needle

should be in the center of the scale.

If the needle enters the red zone , the engine is

overheated. The coolant temperature

warning

illuminates at this time. Pull off the road as soon as

it is safe to do so. Use the engine idle control to run

the engine at a speed slightly higher than normal

idle. If the vehicle has air conditioning, turn it off.
When the gauge needle comes down to near the

center of the scale, shut down the engine and per-

form the checks and corrective actions described

under “If the engine overheats” on this reference

page:

P. 12-7

CAUTION

If the engine overheats, do not shut down the

engine right away. Let it run at a speed slightly

above normal idle and allow the engine to cool.

If the engine is shut down immediately after

stopping, the coolant temperature will rise

quickly and may cause the engine to seize.

Coolant temperature gauge

Z12503

Содержание 360






















































































































































































































Результаты поиска

Содержание 360

Отзывы:

Бренды по названию

Популярные бренды

Sterling 360, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание 360

Отзывы:

Бренды по названию

Популярные бренды