Sterling 360 Скачать руководство пользователя

Страница: 71 / 213

7-3

Should you notice anything unusual about vehicle

operation, stop the vehicle immediately. Check to

find the cause of the problem before continuing. If

you are unable to identify the cause of the problem

or lack the means to do the repairs yourself, contact

an authorized Sterling service facility.

•

Do not shut down the engine while the vehicle is

moving.

•

If the engine should stall while the vehicle is in

motion, depress the brake pedal to slow the

vehicle. Pull off the road as soon as it is safe to

do so.

•

If a red warning light comes on, if the buzzer

sounds, if you notice a strange noise, vibration,

or smell, if steering or braking feels unusual, or

the vehicle behaves abnormally in any way, pull

off the road as soon as it is safe to do so and

identify the cause of the problem.

P. 6-5

•

If you are unable to identify the cause of the

problem, contact an authorized Sterling service

facility.

•

Be especially careful during high-speed driving.

Avoid sharp turns and hard braking except in

emergencies.

•

When driving on narrow streets or when making

a turn, keep in mind that the tracking of the front

and rear inner wheels is different. Use the rear

view mirrors to gain a clear view to the rear.

•

Remember that the mirrors protrude from the

vehicle body. Be careful not to hit pedestrians

and obstructions with the mirrors when driving

on narrow roads.

Vehicle operation

WARNING

While operating the vehicle, never place the

ignition switch in any position other than

“ON.”

If you turn the ignition switch to “ACC,” the

engine will shut down.

If the engine shuts down during driving:

•

Braking efficiency is greatly reduced.

•

The power steering system ceases to

operate.

•

The electrical circuits connected to the

ignition (warning and indicator lights,

gauges, etc.) no longer operate, causing

electric components to malfunction.

Removing the ignition key locks the steering

wheel, making it impossible to steer the vehi-

cle.

Doing any of these things could increase the

possibility of an injury accident or loss of life.

Z01410

Содержание 360






















































































































































































































Результаты поиска

Содержание 360

Отзывы:

Похожие инструкции для 360

Бренды по названию

Популярные бренды

Sterling 360, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание 360

Отзывы:

Похожие инструкции для 360

Бренды по названию

Популярные бренды