Sterling 360 Скачать руководство пользователя страница 78

Страница: 78 / 213

7-10

Starting and driving

•

Never coast downhill with the shift lever in neu-

tral <manual transmission vehicles> or the shift

selector in “N” (neutral) <automatic transmission

vehicles>. This eliminates the effect of both the

engine brake and the exhaust brake. This

causes the service brakes to overheat and the

brake linings to wear prematurely.

In a vehicle with automatic transmission, this

can also cause transmission damage.

•

Do not overuse the service brakes. Overheated

brakes could cause vapor lock and fading, both

of which contribute to poor braking.

NOTE:

•

“Vapor lock” is a condition in which the brake

system becomes so hot that the brake fluid

boils, forming bubbles that reduce hydraulic

pressure and result in poor braking.

•

“Fading” is a condition in which the brake pads

overheat. This reduces friction significantly and

results in poor braking.

•

Reduce engine speed before downshifting.

Do not downshift more than two gears at a time.

This could cause engine overspeed (tachometer

needle in the red zone).

As a rule, reduce engine speed to roughly 2,000

rpm before downshifting. Make sure the tachom-

eter needle does not enter the red zone.

In an automatic transmission vehicle, a safety

device prevents downshifts when the vehicle is

driving at high speed. To downshift in this situa-

tion, first depress the brake pedal and reduce

the vehicle speed.

CAUTION

“Engine overspeed” is used to describe a con-

dition where the engine speed (rpm) exceeds

the maximum safe limit. Persistent engine over-

speed can cause an engine breakdown.

WARNING

Except in an emergency, do not apply the

parking brake while the vehicle is moving

since the vehicle could spin and/or overturn,

causing an injury accident or loss of life.

Z11321

Содержание 360






















































































































































































































Результаты поиска

Содержание 360

Отзывы:

Бренды по названию

Популярные бренды

Sterling 360, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание 360

Отзывы:

Бренды по названию

Популярные бренды