Sterling 360 Скачать руководство пользователя

Страница: 157 / 213

11-49

2.2

Rear axle

•

Bottom surface of the axle housing

3 Removing the wheel

1. Make sure the parking brake is set and the

wheels are chocked.

2. Position a jack under the front or rear axle jack-

ing point of the vehicle, as applicable. Raise the

vehicle high enough to take weight off the

wheel, but low enough that the tire still touches

the ground.

NOTE:

Socket wrenches are not included in the onboard

tools.

WARNING

•

After raising the vehicle slightly, confirm

that the jack is firmly seated at the jacking

point and will not move when the vehicle

is raised.

If the jack were to slip out of position with

the vehicle fully raised, the vehicle could

fall and cause a serious injury.

•

Never start the engine with the vehicle

raised on a jack. Likewise, do not rock the

vehicle or crawl underneath it. Movement

of the jack could result in a serious per-

sonal injury.

•

If the vehicle must be raised for a long

time, support the vehicle with safety

stands. Jacks can slip, allowing the vehi-

cle to fall, which could result in serious

injury or death.

Z12086

Содержание 360






















































































































































































































Результаты поиска

Содержание 360

Отзывы:

Похожие инструкции для 360

Бренды по названию

Популярные бренды

Sterling 360, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание 360

Отзывы:

Похожие инструкции для 360

Бренды по названию

Популярные бренды