Sterling 360 Скачать руководство пользователя

Страница: 54 / 213

5-21

Full exhaust brake function will return as soon as

the original conditions have been restored.

6 Wiper/ washer switch

CAUTION

•

Operating the wipers when the windshield is

dry damages the windshield glass. If the

windshield is dry, squirt it with washer fluid

before operating the wipers.

•

Do not operate the wipers when the rubber

parts of the wiper blades are frozen onto the

windshield, or otherwise stuck to the wind-

shield. This could damage the wiper blades,

and cause the wiper motor to fail.

•

When the wipers are not used for a long

time, substances such as dust or sand can

collect between the wiper blades and the

windshield. Clean the wipers before using

them, to protect the windshield from scratch-

ing.

•

Operating the washers continuously for

more than 20 seconds, or with no fluid in the

reservoir, could damage the washer motor.

1. Rotating the knob at the end of the lever acti-

vates the windshield wipers in one of the follow-

ing three modes:

INT:

Wipers operate intermittently at 3 to 5 sec-

ond intervals.

LO:

Wipers operate at slow speed.

HI:

Wipers operate at fast speed.

2. If the wipers do not clean the windshield effec-

tively, replace the wiper blades.

P. 11-55

CAUTION

Wiper blade rubber can deteriorate over time

and cause the wipers to work ineffectively. If the

blades are badly worn or torn, the windshield

can be scratched.

3. To activate the windshield washer, pull the lever

towards you.

NOTE:

Be careful when operating the washer switch.

Washer fluid may splash on objects nearby.

4. Check the level of the washer fluid reservoir and

refill it when low.

P. 11-56

WARNING

In cold weather, use the heater to warm the

windshield before operating the washers.

Washer fluid could freeze on the windshield,

obstruct your vision, and cause an accident.

Z10723

OFF

INT

Содержание 360






















































































































































































































Результаты поиска

Содержание 360

Отзывы:

Похожие инструкции для 360

Бренды по названию

Популярные бренды

Sterling 360, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание 360

Отзывы:

Похожие инструкции для 360

Бренды по названию

Популярные бренды