Sterling 360 Скачать руководство пользователя

Страница: 38 / 213

5-5

NOTE:

•

Before driving, turn OFF the engine warm-up

switch. This deactivates the exhaust brake.

•

The exhaust brake is used when the vehicle is

not moving to make the engine warm up more

quickly and to make the heater work more effec-

tively on cold days.

•

When the exhaust brake is turned ON, the

engine’s idle speed increases automatically. As

a result, the coolant warms up more quickly.

CAUTION

•

Be sure to set the engine idle control to the

AUTO position while driving. Driving with the

engine idle control in any other position can

cause abrupt startups or premature clutch

wear.

•

Turn the engine idle control gently. Forcing it

could damage the internal mechanism.

•

If the idle speed is set too low, the engine

may become extremely noisy. Make sure the

idle speed is correct.

NOTE:

If the engine idle control is used to increase engine

speed while the engine warm-up switch is ON, the

engine may produce black smoke. Before turning

ON the engine warm-up switch, be sure to set the

engine idle control to AUTO.

•

Automatic control

Engine speed is automatically controlled by moni-

toring the engine coolant temperature. The engine

speed automatically decreases as the coolant tem-

perature rises.

•

Manual control

Turn the dial on the engine idle control clockwise to

increase engine speed.

Turn it counterclockwise to decrease engine speed.

While driving, keep the engine idle control in the

AUTO position.

Engine idle control

WARNING

Do not attempt to use the engine idle control

to increase engine speed while the vehicle is

in motion. It will be impossible to control the

vehicle’s speed using the accelerator pedal.

This could cause an injury accident or loss of

life.

Engine idle speed

625 to 675 rpm

Содержание 360






















































































































































































































Результаты поиска

Содержание 360

Отзывы:

Похожие инструкции для 360

Бренды по названию

Популярные бренды

Sterling 360, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание 360

Отзывы:

Похожие инструкции для 360

Бренды по названию

Популярные бренды