Sterling 360 страница 75 Скачать руководство пользователя

Страница: 75 / 213

7-7

On downhill grades, use the engine brake and the

exhaust brake to slow the vehicle, before using the

service brakes to stop the vehicle. Do not rely

exclusively on the service brakes.

P. 7-9

1. When the

, and/or

warning lights

illuminate, stop the vehicle immediately and per-

form the necessary checks.

P. 6-6

2. Brake the vehicle slowly. For smoother, more

stable braking, lift up on the brake pedal two or

three times as you gradually bring the vehicle to

a complete stop.

Remember that the braking distance can vary

according to vehicle speed, load weight, and

road conditions.

NOTE:

The engine brake takes effect whenever the accel-

erator pedal is released. The lower the transmission

gear, the more powerful the engine braking.

ABS is an electronic braking control system that

operates automatically without the need for driver

intervention.

Braking

WARNING

•

If any of the brake warning lights illumi-

nate, there is a possibility of brake failure.

Brake failure could cause an injury acci-

dent or loss of life.

•

Do not use the exhaust brake on slippery

road surfaces. The vehicle may skid, caus-

ing an injury accident or loss of life.

•

Avoid sudden braking except in emergen-

cies. Sudden braking causes tire wear and

could cause other vehicle malfunctions.

Worn tires can cause an injury accident or

loss of life. The shock of sudden braking

could also result in an injury.

Antilock braking system (ABS)

WARNING

Although ABS improves vehicle control dur-

ing emergency braking situations, the driver

still has the responsibility to judge driving

conditions, respond to them alertly, and drive

safely in unfavorable situations. For exam-

ple, ABS cannot prevent an injury accident or

loss of life if the driver is speeding or follow-

ing too close.

Z01416

Содержание 360






















































































































































































































Результаты поиска

Содержание 360

Отзывы:

Похожие инструкции для 360

Бренды по названию

Популярные бренды

Sterling 360, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание 360

Отзывы:

Похожие инструкции для 360

Бренды по названию

Популярные бренды