Sterling 360 Скачать руководство пользователя

Страница: 136 / 213

11-28

Pretrip inspection and maintenance

1 Engine oil filter replacing

Replace the oil filter for the first time at the initial

maintenance period of 2500 miles (4000 km).

NOTE:

Do not clean or reuse the oil filter element. Always

replace the filter element with a new one.

Replace the oil filter element each time the engine

oil is changed.

1. Tilt the cab.

P. 11-4

2. Clean the filter and the surrounding area to pre-

vent dirt from entering the new element.

3. Place a container under the oil filter. Remove

the drain plug from the bottom of the oil filter,

and allow the oil in the filter to drain out.

4. Turn the filter element assembly clockwise (in

the direction of arrow ) to remove it. If the

assembly is hard to turn, use a strap wrench.

5. Check the surface of the filter head for dirt

and contamination. If necessary, clean it.

6. Replace the filter element assembly with a new

one. Use only genuine replacement parts.

7. Install the filter element assembly:

Apply a thin coat of engine oil to the gasket

on the mounting surface of the filter element

assembly. Turn the assembly counterclockwise

(in the direction of arrow ) until the gasket

touches the sealing surface of the filter head.

From this point, tighten the filter element assem-

bly an additional three-quarter turn.

To determine how much to tighten, use the four

equally spaced reference marks around the

outside of the filter assembly.

8. Add engine oil.

Filter element replacing

WARNING

•

Wipe up spilled engine oil. Oil remaining

on the engine surface could catch fire and

cause a burn injury.

•

Engine components are extremely hot

immediately after vehicle operation. Hot

engine oil can cause burns.

Replacement

intervals

Every 6000 miles (10 000 km)

or every 12 months

Z12052

Содержание 360






















































































































































































































Результаты поиска

Содержание 360

Отзывы:

Похожие инструкции для 360

Бренды по названию

Популярные бренды

Sterling 360, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание 360

Отзывы:

Похожие инструкции для 360

Бренды по названию

Популярные бренды