Sterling 360 Скачать руководство пользователя страница 82

Страница: 82 / 213

7-14

Starting and driving

A limited-slip differential performs a special func-

tion. When one wheel begins to spin on a slippery

surface, a limited-slip differential diverts torque to

the wheel which is not spinning, providing more

traction to the vehicle.

This function is effective when driving on bumpy or

snow-laden roads, and useful when moving the

vehicle out of mud.

CAUTION

Use only the special oil designed for limited-slip

differentials (on vehicles so equipped).

NOTE:

To determine if a vehicle is equipped with a limited-

slip differential, look for safety stickers near the

driver’s seat and on the rear axle housing.

The limited-slip differential is an automatic function.

It requires no driver intervention. However, it cannot

prevent all skids. Follow safe driving practices to

minimize opportunities for skidding:

•

On slippery road surfaces, do not accelerate

through turns. This could cause the vehicle to

skid.

•

Keep your tires inflated to the same air pres-

sure. Unevenly inflated tires may cause the

vehicle to pull to one side during acceleration.

They will also eventually cause uneven tire

wear.

•

Do not use tires of different outside diameter.

•

Distribute the load evenly. If the load is heavier

at the rear, the vehicle’s tendency to move in a

straight line will increase slightly.

Limited-slip

differential

WARNING

When you raise the vehicle on one side for

replacing a tire or any other purpose, never

rotate the raised wheel. This transmits power

to the wheel that is on the ground. The vehi-

cle could move and cause an injury.

Z09030

Z09031

Z14893

Содержание 360






















































































































































































































Результаты поиска

Содержание 360

Отзывы:

Бренды по названию

Популярные бренды

Sterling 360, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание 360

Отзывы:

Бренды по названию

Популярные бренды