Sterling 360 Скачать руководство пользователя

Страница: 47 / 213

5-14

Switches and controls

CAUTION

•

To prevent transmission damage, come to a

complete stop before shifting from any for-

ward gear into reverse, or vice versa.

•

When the shift lever is in neutral, do not keep

your hand on the lever. Hand pressure is

transmitted to the gears and can damage the

transmission.

•

When shifting, depress the clutch pedal fully

before operating the shift lever. Shifting with

the clutch partly engaged can damage the

transmission.

•

The gear pattern is inscribed on the top surface

of the shift lever.

•

When the shift lever is placed in reverse (R), the

backup lights illuminate. At the same time, the

backup buzzer sounds.

Shift lever

WARNING

When backing up, always double check to

make sure that there is nothing in your path.

If there are pedestrians in the area, or haz-

ards are present, use a backing guide. This

could prevent an injury accident and loss of

life.

Z10807

Содержание 360






















































































































































































































Результаты поиска

Содержание 360

Отзывы:

Похожие инструкции для 360

Бренды по названию

Популярные бренды

Sterling 360, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание 360

Отзывы:

Похожие инструкции для 360

Бренды по названию

Популярные бренды