Sterling 360 Скачать руководство пользователя

Страница: 196 / 213

12-22

In an emergency

CAUTION

•

Make sure both starting systems have the

same voltage outputs, and avoid making

sparks. Otherwise, the vehicle charging sys-

tems could be severely damaged.

•

Always connect the battery, jumper cables

and charger correctly (positive-to-positive

and negative-to-negative). Connecting a

charging device backwards (positive-to-neg-

ative) can damage the vehicle electrical sys-

tems.

When using jumper cables, follow the instructions

below.

1. Shut down the engine of the vehicle with the

booster battery.

2. Check the battery electrolyte level before con-

necting the booster cables. If the fluid is below

the “LOWER” level, add battery fluid or distilled

water.

3. Set the parking brakes on both vehicles and turn

off all lights and other electrical devices.

4. Connect an end of one jumper cable to the posi-

tive (+) terminal of the booster battery . Con-

nect the other end of the cable to the positive (+)

terminal of the discharged battery .

5. Connect one end of the second jumper cable to

the negative (–) terminal of the booster battery

and connect the other end of the second

jumper cable to a ground at least 12 inches (300

mm) away from the discharged battery . The

vehicle frame is usually a good ground.

NOTE:

Do NOT connect the cable to or near the dis-

charged battery.

Keep cigarettes and open flames

well away from the battery.

Emergency starting with jumper

cables

WARNING

•

If you attempt to charge a battery with a

very low electrolyte level, it could overheat

or explode, causing a severe personal

injury.

•

Do not allow the clamps of one cable to

touch the clamps of the other cable. Other-

wise, a spark could occur near a battery,

possibly resulting in severe personal

injury.

•

Unless absolutely necessary, avoid push-

starting the engine. This could cause an

injury accident.

Содержание 360






















































































































































































































Результаты поиска

Содержание 360

Отзывы:

Похожие инструкции для 360

Бренды по названию

Популярные бренды

Sterling 360, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание 360

Отзывы:

Похожие инструкции для 360

Бренды по названию

Популярные бренды