Sterling 360 страница 152 Скачать руководство пользователя

Страница: 152 / 213

11-44

Pretrip inspection and maintenance

1 Parking brake lever stroke check

1. Depress the brake pedal firmly to prevent the

vehicle from moving.

2. Starting with the parking brake lever fully

released, pull the lever upward with a force of 66

Ib (295 N) until it stops moving.

3. Check that the distance moved by the lever

(parking brake lever stroke) is within these lim-

its. For each notch moved, an audible click

should be heard. If necessary, bring the vehicle

to an authorized Sterling service facility.

4. Make sure the parking brake lever locks

securely in the set (fully raised) position.

2 Parking brake performance

1. Park the vehicle on a downgrade with a dry road

surface.

2. Set the parking brake and check that the parking

brake can hold the vehicle. If an appropriate

downgrade is not available, drive the vehicle at

low speed, activate the parking brake, and

check that it can stop the vehicle at speeds

under 10 mph (16 km/h).

3. If there is any problem, contact an authorized

Sterling service facility.

Check the clutch for condition. If there is any prob-

lem, contact an authorized Sterling service facility.

Parking brake checking and

adjusting

Inspection interval

Daily pretrip inspection

Parking brake stroke

7 to 9 notches

WARNING

During a braking test, be attentive to road

conditions. Driving a vehicle with a braking

problem could cause an injury accident or

loss of life.

Clutch checking

Inspection

intervals

Daily pretrip inspection and

every 6000 miles (10 000 km)

Z11606

Содержание 360






















































































































































































































Результаты поиска

Содержание 360

Отзывы:

Похожие инструкции для 360

Бренды по названию

Популярные бренды

Sterling 360, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание 360

Отзывы:

Похожие инструкции для 360

Бренды по названию

Популярные бренды