Sterling 360 Скачать руководство пользователя страница 93

Страница: 93 / 213

8-9

1.4

A/C (air conditioner) button

The A/C button provides cool, dry air to the cab.

Press the button to turn on the air conditioning.

When air conditioning is selected, the A/C indicator

in the center of the switch illuminates.

With the A/C indicator on, press the button again to

turn off the air conditioning. The A/C indicator goes

out.

1.5

Air selection switch

Use the air selection switch to direct cool air to the

selected outlet as desired.

•

For cool airflow toward the upper body:

Place the air selection switch in the face

position.

•

For cool airflow toward the upper body and

toward the feet:

Place the air selection switch in the bi-level

position.

•

For cool airflow toward the feet:

Place the air selection switch in the foot

position.

•

For cool airflow toward the feet and toward

the windshield:

Place the air selection switch in one of the two

floor/defrost positions.

1. With the switch in the floor/defrost 75-25

position , most of the air is directed toward the

feet and the rest of the air is directed toward the

windshield.

Z05613

Z14910

Z14911

Z14912

Z14913

Содержание 360






















































































































































































































Результаты поиска

Содержание 360

Отзывы:

Бренды по названию

Популярные бренды

Sterling 360, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание 360

Отзывы:

Бренды по названию

Популярные бренды