Sterling 360 Скачать руководство пользователя страница 199

Страница: 199 / 213

12-25

•

To prevent damage to the front bumper when

raising the front wheels, attach an L-shaped pro-

tection plate.

•

Tow the vehicle only with a truck that is specially

designed for towing heavy equipment.

•

If you disconnect the rear axle shaft to tow the

vehicle, the axle lubricant level may be low.

Check the axle lubricant level and add more if

necessary.

P. 11-23

•

Attach the towing device securely to the front

axle. Due to the variables that exist in towing,

positioning the towing device is the sole respon-

sibility of the towing vehicle operator.

CAUTION

•

Do not attach the towing device to the

bumper. This could damage the bumper.

•

Before raising the front wheels for towing,

make sure that the towing device will not

damage the stabilizer bar or any other part of

the vehicle.

•

If the towing device looks likely to cause

damage, use thicker L-shaped protection

plates to hold the device further from the

vehicle.

•

Never use the tie-down hook(s) under the

frame for towing purposes. The tie-down

hook is used to secure the vehicle when

transporting it, not for towing. If the hook is

used for towing, it may cause damage to the

front bumper or frame.

Z12074

L-shaped

protection

plate

Chain

Z15095

Содержание 360






















































































































































































































Результаты поиска

Содержание 360

Отзывы:

Бренды по названию

Популярные бренды

Sterling 360, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание 360

Отзывы:

Бренды по названию

Популярные бренды