Sterling 360 Скачать руководство пользователя

Страница: 65 / 213

6-9

2. Pump the brake pedal several times. Check to

make sure that the brake fluid level does not

drop.

3. If the fluid level drops, it indicates fluid leakage.

Bring the vehicle to an authorized Sterling ser-

vice facility for repairs.

3 Alternator no charge warning

The alternator no charge warning illuminates as a

bulb check when the ignition switch is turned to

“ON.” It goes out when the engine is started and the

alternator begins to charge the battery.

This light also illuminates if a problem occurs in the

vehicle charging system while the engine is run-

ning. In that case, pull off the road as soon as it is

safe to do so, and perform the following checks.

1. Check for a broken alternator belt, and replace it

if necessary. Also check the belt tension, and

tighten the belt if necessary.

P. 11-39

2. Check for a blown high-amp fuse in the vehicle

charging circuit. If blown, replace it with a new

one.

P. 12-12

3. If both the above checks have turned out OK,

the problem is probably in the vehicle charging

system. Bring the vehicle to an authorized Ster-

ling service facility for repairs.

4 Low engine-oil pressure/level warning

The low engine-oil pressure/level warning illumi-

nates as a bulb check when the ignition switch is

turned to “ON.” Normally, it goes out soon after the

engine has started.

If the warning illuminates while the engine is run-

ning, the cause may be either low engine-oil level or

low engine-oil pressure. Pull off the road as soon as

it is safe to do so, and perform the following checks.

1. Check the engine oil level. Add oil if low.

P. 11-17

2. Check the engine for signs of oil leaks.

3. If the oil level is normal and there are no oil

leaks, the problem is in the lubrication system.

Contact an authorized Sterling service facility.

NOTE:

When it is cold, engine oil viscosity increases. This

may cause the warning light to stay on for a while

even after the engine has started. Wait until the light

goes out before moving the vehicle.

CAUTION

Never continue driving with the low engine-oil

pressure/level warning illuminated. The engine

could seize.

Z10484

Z10476

Содержание 360






















































































































































































































Результаты поиска

Содержание 360

Отзывы:

Похожие инструкции для 360

Бренды по названию

Популярные бренды

Sterling 360, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание 360

Отзывы:

Похожие инструкции для 360

Бренды по названию

Популярные бренды