Sterling 360 Скачать руководство пользователя

Страница: 172 / 213

11-64

Pretrip inspection and maintenance

•

When the vehicle is washed, braking perfor-

mance can be reduced if water enters the brake

drums or splashes over the brake discs. If this

happens, drive slowly and put light pressure on

the brake pedal. This will dry out the brakes.

CAUTION

ABS electric wiring is located behind the

wheels. When removing snow or ice that has

adhered to the wheel areas, be careful not to

damage the ABS components and wiring. Also,

avoid exposing the ABS components and wiring

to high-pressure water or steam cleaners. This

could cause the ABS system to malfunction.

1.3

Waxing

Wax the vehicle whenever the wax on the vehicle

ceases to repel water.

Before applying wax, move the vehicle out of direct

sunlight. Do not apply wax when the paint work is

warm to the touch.

1.4

Dirt caked on paint work

Wash off the following contaminants: calcium chlo-

ride and other salts, road chemicals, oil, tar, tree

sap, bird droppings, and industrial soot. They can

corrode, discolor, or stain the vehicle finish.

If you find them hard to remove, use a synthetic

cleaner that does not scratch or otherwise damage

painted surfaces.

1.5

Small chips and scratches

Fix small chips, cracks, and scratches in the finish

as soon as possible, particularly when body metal is

exposed. Do not wait for corrosion to set in. Your

Sterling dealer can supply touch-up paint for small

chips and scratches.

2 Interior cleaning

CAUTION

Do not clean the interior by splashing water on

it. This could damage the electrical system.

•

Remove dirt as soon as possible, before it

leaves a permanent mark or stain.

•

Clean the interior of the vehicle with a sponge or

soft cloth. Remove stubborn dirt with a soft

brush.

•

Do not clean plastic parts with thinner or gaso-

line. This could result in cracking or discolora-

tion.

•

Remove the floor mat before washing the floor.

Otherwise, the floor could rust and components

of the electrical system could be damaged.

•

If water collects in the cab, either remove the

drain plug from the floor and allow the water to

drain out or wipe up all the water using a cloth.

Z11956

Содержание 360






















































































































































































































Результаты поиска

Содержание 360

Отзывы:

Похожие инструкции для 360

Бренды по названию

Популярные бренды

Sterling 360, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание 360

Отзывы:

Похожие инструкции для 360

Бренды по названию

Популярные бренды