Sterling 360 Скачать руководство пользователя страница 159

Страница: 159 / 213

11-51

4 Mounting the wheel

1. Clean the following areas before mounting the

wheel. Dirt or debris in these areas could cause

the wheel nuts to become loose during opera-

tion.

Threads of the wheel studs and nuts

The spherical surface of the wheel nuts

Inner wheel and hub mounting surfaces

Dual wheel mating surfaces

Wheel nut seating surfaces

Dual wheel inside rim surfaces

Hub pilots

2. Mount the wheel on the hub. Install the wheel

nuts tight enough to hold the wheel in position. If

the wheel nut has a spherical end , direct the

spherical end toward the wheel.

NOTE:

The studs and nuts have stamped marks for easy

identification; an “R” mark for right-hand threads

and an “L” mark for left-hand threads.

3. Lower the vehicle slowly until the tire makes

contact with the ground.

4. Tighten the wheel nuts in three stages, ending

with the final torque shown in the table. Use the

tightening sequence shown in the illustration.

WARNING

•

Dirt or debris in the wheel mounting area

could cause the wheel nuts to loosen,

resulting in an injury accident.

•

If wheel stud or nut threads are damaged,

or the disc wheel is cracked or otherwise

damaged, replace the wheel. A damaged

wheel could work loose and cause an

injury accident.

Wheel nut

torque

325 to 398 lbf·ft (440 to 540 N·m)

Z09309

Z09310

Z09311

Содержание 360






















































































































































































































Результаты поиска

Содержание 360

Отзывы:

Бренды по названию

Популярные бренды

Sterling 360, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание 360

Отзывы:

Бренды по названию

Популярные бренды