Sterling 360 Скачать руководство пользователя

Страница: 55 / 213

5-22

Switches and controls

CAUTION

If the hazard flashers are operated for an

extended period of time, this can discharge the

battery and make the engine impossible to start.

The hazard flashers are used to warn other traffic if

you find it necessary to stop your vehicle in an

emergency.

The flashers operate with the ignition switch at any

position.

Press in the flasher button to cause all the turn sig-

nals to flash at the same time. On the dash, the turn

signal indicators

also flash.

With the turn signals flashing, press the flasher but-

ton again to make the turn signals go out.

Use the panel light switch to adjust the brightness of

the dash illumination.

With the instrument cluster illuminated, press and

hold the rocker switch to make the lights brighter or

dimmer as shown in the illustration. When the lights

have reached the desired brightness, release the

switch.

NOTE:

The panel lights can be brightened and dimmed

only within a fixed range. Once the lights have been

brightened or dimmed to their full extent, further

pressing of the panel light switch has no effect.

The dome light switch operates the lighting inside

the cab. With the ignition switch in the “ON” posi-

tion, operate the dome light switch to turn the inte-

rior lighting on or off. An indicator light comes on

inside the switch when it is in the “ON” position.

CAUTION

Do not leave the interior lighting on for an

extended period when the engine is not running.

This can drain the battery.

Hazard flashers

Panel light switch

Dome light switch

Z10816

Z14901

Bright

Dim

Z14902

Содержание 360






















































































































































































































Результаты поиска

Содержание 360

Отзывы:

Похожие инструкции для 360

Бренды по названию

Популярные бренды

Sterling 360, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание 360

Отзывы:

Похожие инструкции для 360

Бренды по названию

Популярные бренды