Sterling 360 Скачать руководство пользователя страница 50

Страница: 50 / 213

5-17

Overdrive can be switched on and off with the

switch located on the shift selector.

When the switch is in the “OFF” position, an

indicator illuminates.

•

Overdrive ON

Overdrive should be switched on as desired for nor-

mal driving and always for high-speed driving. With

the transmission in “D” (drive), shifts are made auto-

matically from 1st through 6th gears, and fuel con-

sumption is minimized.

In cold weather, the transmission may not initially

make automatic shifts into 5th and 6th gears due to

low fluid temperature. This condition is normal and

will be resolved as the fluid temperature rises.

•

Overdrive OFF

Overdrive should be switched off when engine brak-

ing is needed on a downhill grade or on long uphill

grades. In “D” (drive), the transmission shifts auto-

matically from 1st through 4th gears.

NOTE:

Even with the overdrive lockout switch in the “OFF”

position, the transmission will select 5th and 6th

gears if there is any risk of engine overspeed.

Overdrive lockout switch

Parking brake lever

WARNING

•

Do not use the parking brake when the

vehicle is in motion except in an emer-

gency.

Example

: The service brakes have

failed. Such use of the parking brake may

make the vehicle spin or roll over, causing

a personal injury or loss of life. It may

also cause damage to vehicle compo-

nents.

•

Illumination of the

warning does not

necessarily indicate that the parking

brake has been fully activated. Be sure to

pull the lever all the way. The vehicle

could roll, causing an injury or loss of life.

Z11854

OFF

Содержание 360






















































































































































































































Результаты поиска

Содержание 360

Отзывы:

Бренды по названию

Популярные бренды

Sterling 360, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание 360

Отзывы:

Бренды по названию

Популярные бренды