Sterling 360 страница 70 Скачать руководство пользователя

Страница: 70 / 213

7-2

Starting and driving

•

Do not carry containers of fuel or spray cans in

the cab.

•

Do not attach any decorative panels or similar

items to the windshield.

•

Check the immediate area around the vehicle.

Use mirrors when necessary. There should be

no persons or obstacles under, in front of, on

either side, or behind the vehicle.

•

With the parking brake set, start the engine and

allow it to idle.

P. 5-6

•

With the engine idling, release the parking

brake. Be sure it is fully released.

•

Check that none of the red warning lights are

illuminated. The

warning should go out

when the parking brake is released.

•

<manual transmission> Disengage the clutch

and put the vehicle in gear. Engage the clutch

slowly, to start the vehicle moving.

CAUTION

Avoid sudden starts. They place undue strain on

the vehicle. When pulling away, do not race the

engine and suddenly engage the clutch. Do not

ride the clutch for extended periods. This can

cause clutch damage.

•

<automatic transmission> Depress the brake

pedal and move the shift selector out of “P”

(park). If the engine’s idle speed is too high, the

vehicle may lurch when selecting “D” (drive) or

“R” (reverse). Make sure the engine is idling at

normal speed before pulling away.

•

Be particularly careful when backing up. If you

cannot see clearly using the mirrors, get out of

the vehicle and check.

Vehicle start-up

WARNING

Do not carry fuel in the cab. An increase in

cab temperature could cause the fuel vapor

to catch fire, with risk of personal injury or

loss of life.

WARNING

Attaching a decorative panel or similar item

to the windshield could impede visibility and

result in an accident, causing death or seri-

ous personal injury. In addition, any suction

cup on such an item could cause a fire by

acting as a lens.

Z11316

Содержание 360






















































































































































































































Результаты поиска

Содержание 360

Отзывы:

Похожие инструкции для 360

Бренды по названию

Популярные бренды

Sterling 360, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание 360

Отзывы:

Похожие инструкции для 360

Бренды по названию

Популярные бренды