Appendix A
Non ROUTE
Overview
The Microlog’s Non ROUTE module allows you to collect measurement data for POINTs
not previously downloaded to the Microlog from your @ptitude Analyst host software.
Since these measurements are not downloaded to the Microlog as part of your data
collection ROUTEs, they are often referred to as “Non ROUTE” measurements.
In Non ROUTE mode, you can quickly apply one of the pre
-defined “standard” type
vibration measurements, or you can set up a new “user defined” measurement and
immediately collect the new measurement’s data for analysis purposes. After data
collection, the
Non ROUTE
measurement’s data can be transferred to the host software
and merged into your permanent @ptitude Analyst measurement database.
The CMXA 75-SL-Z2 Microlog has restrictions on the types of accessories that may
be used with the instrument in ATEX Zone 2 areas, in some cases limiting the types
of POINTs that may be collected.
Refer to Appendix D of this manual for important restrictions when using the CMXA
75-SL-Z2 Microlog in a Zone 2 restricted area.
Non ROUTE Mode Operations
Overview
In Non ROUTE mode, you have two options for measurement data collection.
You may:
•
Quickly perform one of the pre-set “standard” measurements displayed as icons on
the Non ROUTE screen, or
•
Set-up and perform a new User defined measurement.
To access Non ROUTE mode:
•
From the
ROUTE
screen, press the
Nonroute
function button. The
Nonroute
screen displays.
The
Nonroute
function button appears on the ROUTE screen only
if
Use Legacy Nonroute
is the selected
Nonroute
setting on the
system Setup screen.
SKF Microlog - GX Series
A - 1
User Manual
