Spindle Test Module
Spindle Tests Overview
Nose Run-Out test overview
Figure 10 – 13.
Perform a Nose Run
-
Out
Test.
To perform a nose run-out test:
•
Clean all tool nose surfaces, inside and outside.
•
If scratches exist on tool nose surfaces, polish with a lapping film 30µ, 12µ alt 5µ,
to erase high peaks. Afterwards clean with liquid.
•
Power the Microlog on and select the
Spindle
module’s
Nose Run-Out
test.
•
In
Nose Run-Out
test setup screens, enter the tool holder type and select the
appropriate conformance setup.
Figure 10 – 14.
Nose Run
-
Out Test Setup Screens.
SKF Microlog - GX Series
10 - 11
User Manual
