8
_ installing the oven
CONNECTING TO THE MAINS POWER SUPPLY
Electrical connections must be made as per
the connection plate fixed to the back of the
appliance by an electrical fitter who must ensure
that the appliance has been connected up in
accordance with fitting instructions and local
regulations.
Where the appliance is not connected to the
mains electricity supply by a plug, an omni polar
cutout device (with a contacts gap of at least 3
mm) must be fitted on the supply side of the connection to meet safety requirements.
When power is connected, the electronics of the oven are initialised; this neutralizes
the lighting for a few seconds. The electric cable (H05 RR-F or H05 VV-F, Min. 1.5
m, 1.5~2.5 mm²) must be long enough for it to be connected to the built-in oven
standing on the floor in front of its unit.
Open the back cover) and completely unscrew the connection screw and the cable
clamp before fitting conducting wires into the appropriate terminals.
The earth wire must be connected to the ( ) terminal of the oven.
If the oven is connected to the power supply by a plug, this must remain accessible
once the oven has been fitted.
We cannot accept any liability in the event of an accident resulting from non-existent or
faulty earthing.
Neutral
Live
Earth
BQ2Q7G214- BOL-DG68-00447J-01_EN.indb 8
7/5/2013 11:35:54 AM