6. DeviceNet COMMUNICATION
IMR01Y36-E2
29
Continued from the previous page.
No. Items
Data
range
Factory
set value
On
and
after
6
Selected set items
Setting items are set by the
configuration tool or via Explicit
message communication are
assigned by the number of
controllers similarly set.
[Factory set value:
Set value (SV)]
Same as the range of setting items selected
Same as the
factory set
value of
setting data
items
selected
In order to validate data after communication data No. 6, it is necessary to set the controllers
corresponding to communication data Nos. 2 and 3 to “1: Setting enabled” or to
communication data No. 1 to “1: All-controller setting enabled.”
For the setting method of the number of communication data items, refer to the following.
−
5.3 DIP Switch Setting (P. 22)
,
−
5.4 Communication Environment Setting by Rotary Switch (P. 23)
−
Number of communication data items setting by DIP switch (P. 32)
−
Communication parameter setting by configuration tool (P. 33)
−
Communication parameter setting by Explicit message communication (P. 43)
For the setting method of the number of communication controllers, controller address and
automatic acquisition of controller address, refer to the following.
−
5.4 Communication Environment Setting by Rotary Switch (P. 23)
−
Communication parameter setting by configuration tool (P. 33)
−
Communication parameter setting by Explicit message communication (P. 43)
For the setting method of the action mode, refer to the following.
−
5.4 Communication Environment Setting by Rotary Switch (P. 23)
−
Communication parameter setting by Explicit message communication (P. 43)
For contents of setting data items, refer to
7. COMMUNICATION DATA LIST (P. 47)
.
