RKC INSTRUMENT COM-JH, Инструкция по эксплуатации

Страница: 123 / 128

APPENDIX
IMR01Y36-E2 117
Continued from the previous page.
ID Description Get Set Type Value
Attributes 31 Operation mode assignment 1 Yes Yes INT Refer to P. 77
32 Operation mode assignment 2 Yes Yes INT Refer to P. 77
33 SV select function Yes Yes INT Refer to P. 77
34 Remote SV function master channel
module address
Yes Yes INT Refer to P. 77
35 Remote SV function master channel
selection
Yes Yes INT Refer to P. 77
36
Output distribution master channel module
address
Yes Yes
INT Refer to P. 77
37 Output distribution master channel selection Yes Yes INT Refer to P. 77
38
Address of interacting modules
Yes Yes INT Refer to P. 77
39 Channel selection of interacting modules Yes Yes INT Refer to P. 77
40 Selection switch of interacting modules Yes Yes WORD Refer to P. 78
41 Control RUN/STOP holding setting Yes Yes INT Refer to P. 78
42 Interval time Yes Yes INT Refer to P. 78
43 Unused No No UINT
⎯
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
255 Unused No No UINT
⎯
DeviceNet service Parameter option
Services 0x0E Get_Attribute_Single None
0x10 Set_Attribute_Single None
Z-DIO Module Object (0x66: 66Hex)
Object class
Attributes Not supported
Services Not supported