7. COMMUNICATION DATA LIST
IMR01Y36-E2
57
Continued from the previous page.
ID
Name
Number
of data
items
Attri-
bute
Data range
Factory
set value
ID83 to ID203 are Engineering setting data. [Writable in the STOP mode]
83
(0x0053)
Input type
64
R/W 0: TC input K
1: TC input J
2: TC input R
3: TC input S
4: TC input B
5: TC input E
6: TC input N
7: TC input T
8: TC input W5Re/W26Re
9: TC input PLII
12: RTD input Pt100
13: RTD input JPt100
14: Current input 0 to 20 mA DC
15: Current input 4 to 20 mA DC
16: Voltage (high) input 0 to 10 V DC
17: Voltage (high) input 0 to 5 V DC
18: Voltage (high) input 1 to 5 V DC
19: Voltage (low) input 0 to 1 V DC
20: Voltage (low) input 0 to
100 mV DC
21: Voltage (low) input 0 to 10 mV DC
22: Feedback resistance input 100 to
150
Ω
23: Feedback resistance input 151
Ω
to
6
k
Ω
If changed to Voltage (high) input from
TC/RTD/Current/Voltage (low)/Feedback
resistance input, select the hardware by the
input selector switch at the side of the
module. For the selecting procedure,
refer to
SRZ Instruction Manual
(IMS01T04-E
)
.
Based on
model code.
When not
specifying: 0
84
(0x0054)
Display unit
64
R/W 0:
°
C
1:
°
F
Use to select the temperature unit for
Thermocouple (TC) and RTD inputs.
0
85
(0x0055)
Decimal point position
64
R/W 0: No decimal place
1: One decimal place
2: Two decimal places
3: Three decimal places
4: Four decimal places
TC input:
•
K, J, T, E: Only 0 or 1 can be set.
•
R, S, B, N, PLII, W5Re/W26Re:
Only 0 can be set.
RTD input: Only 0 or 1 can be set.
Voltage (V)/Current (I) inputs:
From 0 to 4 can be set.
Based on
model code.
When not
specifying:
TC/RTD: 0
V/I: 1
Continued on the next page.
