7. COMMUNICATION DATA LIST
IMR01Y36-E2
67
Continued from the previous page.
ID
Name
Number
of data
items
Attri-
bute
Data range
Factory
set value
167
(0x00A7)
Output limiter low
[heat-side]
♣
64 R/W
−
5.0 % to Output limiter high [heat-side]
Position proportioning control:
Becomes validated only when there is
Feedback resistance (FBR) input and it
does not break.
−
5.0
168
(0x00A8)
Output change rate limiter
(up) [cool-side]
♣
64 R/W
0.0
169
(0x00A9)
Output change rate limiter
(down) [cool-side]
♣
64 R/W
0.0 to 100.0 %/seconds
(0.0: OFF)
Becomes invalidated when in Position
proportioning control.
0.0
170
(0x00AA)
Output limiter high
[cool-side]
♣
64
R/W Output limiter low [cool-side] to 105.0 %
105.0
171
(0x00AB)
Output limiter low
[cool-side]
♣
64 R/W
−
5.0 % to Output limiter high [cool-side]
−
5.0
172
(0x00AC)
Unused
⎯
⎯
⎯
⎯
173
(0x00AD)
Unused
⎯
⎯
⎯
⎯
174
(0x00AE)
AT bias
♣
64
R/W
−
Input span to +Input span
0
175
(0x00AF)
AT cycles
♣
64
R/W 0: 1.5 cycles
1: 2.0 cycles
2: 2.5 cycles
3: 3.0 cycles
1
176
(0x00B0)
Output value with AT
turned on
♣
64 R/W Output value with AT turned off to
+
105.0 %
Actual output values become those
restricted by the output limiter.
Position proportioning control:
Becomes validated only when there is
Feedback resistance (FBR) input and it
does not break (high limit of feedback
resistance input at AT).
105.0
177
(0x00B1)
Output value with AT
turned off
♣
64 R/W
−
105.0 % to Output value with AT
turned on
Actual output values become those
restricted by the output limiter.
Position proportioning control:
Becomes validated only when there is
Feedback resistance (FBR) input and it
does not break (low limit of feedback
resistance input at AT).
−
105.0
178
(0x00B2)
AT differential gap time
♣
64
R/W 0.0 to 50.0 seconds
10.0
♣
Parameters only used for Heat/Cool PID control or position proportioning control, therefore data for CH2 and
CH4 of Z-TIO modules are unused.
Continued on the next page.
