7. COMMUNICATION DATA LIST
IMR01Y36-E2
60
Continued from the previous page.
ID
Name
Number
of data
items
Attri-
bute
Data range
Factory
set value
118
(0x0076)
Event 1 delay timer
64
R/W 0 to 18000 seconds
0
119
(0x0077)
Force ON of Event 1
action
64 R/W
Bit data
Bit 0: Event output turned on at input
error occurrence
Bit 1: Event output turned on in Manual
mode
Bit 2: Event output turned on during the
Autotuning (AT) function is being
executed
Bit 3: Event output turned on during the
Setting change rate limiter is being
operated
Bit 4 to Bit 15: Unused
Data 0: Invalidate
1: Validate
[Decimal number: 0 to 15]
0
120
(0x0078)
Event 2 type
64
R/W 0: None
1: Deviation high
(Using SV monitor value)
1
2: Deviation low
(Using SV monitor value)
1
3: Deviation high/low
(Using SV monitor value)
1
4: Band (Using SV monitor value)
1
5: Process high
1
6: Process low
1
7: SV high
8: SV low
9: Unused
10: MV high [heat-side]
1, 2
11: MV low [heat-side]
1, 2
12: MV high [cool-side]
1
13: MV low [cool-side]
1
14: Deviation high (Using local SV)
1
15: Deviation low (Using local SV)
1
16: Deviation high/low
(Using local SV)
1
17: Deviation (Using local SV)
1
18: Deviation between channels high
1
19: Deviation between channels low
1
20: Deviation between channels
high/low
1
21: Deviation between channels band
1
1
Event hold action is available.
2
If there is Feedback resistance (FBR)
input in Position proportioning control,
set to the Feedback resistance (FBR)
input value.
Based on
model code.
When not
specifying: 0
Continued on the next page.
