RKC INSTRUMENT COM-JH, Инструкция по эксплуатации

Страница: 124 / 128

APPENDIX
IMR01Y36-E2
118
Object instance ( : 1 to 128)
Object instances 1 to 128 correspond to channels 1 to 8 of controllers (TIO modules of SRZ)
1 to 16.
If Get is made to the instance No. corresponding to the nonexistent controller No. in
communication items other than “unused,” “0” is read while no error occurs if set is made
(no data is written).
ID Description Get Set Type Value
Attributes 1 Digital input (DI) state Yes No WORD Refer to P. 79
2 Digital output (DO) state Yes No WORD Refer to P. 79
3 Error code Yes No INT Refer to P. 79
4 Integrated operating time monitor Yes No INT Refer to P. 79
5 Backup memory state monitor Yes No INT Refer to P. 79
6 RUN/STOP transfer Yes Yes INT Refer to P. 79
7 DO manual output Yes Yes INT Refer to P. 79
8 DO output distribution selection Yes Yes INT Refer to P. 79
9 DO output distribution bias Yes Yes INT Refer to P. 79
10 DO output distribution ratio Yes Yes INT Refer to P. 79
11 DO proportional cycle time Yes Yes INT Refer to P. 80
12 DO minimum ON/OFF time of
proportioning cycle
Yes Yes INT Refer to P. 80
13 DI function assignment Yes Yes INT Refer to P. 80
14 Memory area setting signal Yes Yes INT Refer to P. 80
15 DO signal assignment module address 1 Yes Yes INT Refer to P. 80
16 DO signal assignment module address 2 Yes Yes INT Refer to P. 80
17 DO output assignment 1 [DO1 to DO4] Yes Yes INT Refer to P. 80
18 DO output assignment 2 [DO5 to DO8] Yes Yes INT Refer to P. 80
19 DO energized/de-energized Yes Yes INT Refer to P. 80
20 DO output distribution master channel
module address
Yes Yes INT Refer to P. 80
21 DO output distribution master channel
selection
Yes Yes INT Refer to P. 80
22 DO manipulated output value (MV) at
STOP mode
Yes Yes INT Refer to P. 80
23 DO output limiter (high) Yes Yes INT Refer to P. 80
24 DO output limiter (low) Yes Yes INT Refer to P. 80
25 Control RUN/STOP holding setting Yes Yes INT Refer to P. 80
26 Interval time Yes Yes INT Refer to P. 80
27 Unused No No UINT
⎯
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
255 Unused No No UINT
⎯
DeviceNet service Parameter option
Services 0x0E Get_Attribute_Single None
0x10 Set_Attribute_Single None