Renesas H8S/2318 series, Руководство по оборудованию

Страница: 141 / 1121

Rev. 5.00, 12/03, page 111 of 1088
5.1.3 Pin Configuration
Table 5-1 summarizes the pins of the interrupt controller.
Table 5-1 Interrupt Controller Pins
Name Symbol I/O Function
Nonmaskable interrupt NMI Input Nonmaskable external interrupt; rising or
falling edge can be selected
External interrupt
requests 7 to 0
IRQ7
to
IRQ0
Input Maskable external interrupts; rising, falling, or
both edges, or level sensing, can be selected
5.1.4 Register Configuration
Table 5-2 summarizes the registers of the interrupt controller.
Table 5-2 Interrupt Controller Registers
Name Abbreviation R/W Initial Value Address
*
1
System control register SYSCR R/W H'01 H'FF39
IRQ sense control register H ISCRH R/W H'00 H'FF2C
IRQ sense control register L ISCRL R/W H'00 H'FF2D
IRQ enable register IER R/W H'00 H'FF2E
IRQ status register ISR R/(W)
*
2
H'00 H'FF2F
Interrupt priority register A IPRA R/W H'77 H'FEC4
Interrupt priority register B IPRB R/W H'77 H'FEC5
Interrupt priority register C IPRC R/W H'77 H'FEC6
Interrupt priority register D IPRD R/W H'77 H'FEC7
Interrupt priority register E IPRE R/W H'77 H'FEC8
Interrupt priority register F IPRF R/W H'77 H'FEC9
Interrupt priority register G IPRG R/W H'77 H'FECA
Interrupt priority register H IPRH R/W H'77 H'FECB
Interrupt priority register I IPRI R/W H'77 H'FECC
Interrupt priority register J IPRJ R/W H'77 H'FECD
Interrupt priority register K IPRK R/W H'77 H'FECE
Notes: 1. Lower 16 bits of the address.
2. Can only be written with 0 for flag clearing.