Renesas H8S/2318 series, Руководство по оборудованию

Страница: 360 / 1121

Rev. 5.00, 12/03, page 330 of 1088
9.2.6 Timer Counters (TCNT)
Channel 0: TCNT0 (up-counter)
Channel 1: TCNT1 (up/down-counter
*
)
Channel 2: TCNT2 (up/down-counter
*
)
Channel 3: TCNT3 (up-counter)
Channel 4: TCNT4 (up/down-counter
*
)
Channel 5: TCNT5 (up/down-counter
*
)
Bit : 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Initial value : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
R/W : R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W
Note: * These counters can be used as up/down-counters only in phase counting mode or when
counting overflow/underflow on another channel. In other cases they function as up-
counters.
The TCNT registers are 16-bit counters. The TPU has six TCNT counters, one for each channel.
The TCNT counters are initialized to H'0000 by a reset and in hardware standby mode.
The TCNT counters cannot be accessed in 8-bit units; they must always be accessed as a 16-bit
unit.
9.2.7 Timer General Registers (TGR)
Bit : 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Initial value : 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
R/W : R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W
The TGR registers are 16-bit registers with a dual function as output compare and input capture
registers. The TPU has 16 TGR registers, four each for channels 0 and 3 and two each for channels
1, 2, 4, and 5. TGRC and TGRD for channels 0 and 3 can also be designated for operation as
buffer registers*. The TGR registers are initialized to H'FFFF by a reset and in hardware standby
mode.
The TGR registers cannot be accessed in 8-bit units; they must always be accessed as a 16-bit unit.
Note: * TGR buffer register combinations are TGRA—TGRC and TGRB—TGRD.