PerkinElmer PINAACLE 900 Series, Руководство по оборудованию и обслуживанию для клиентов

Страница: 238 / 390

222
Maintenance
3. Locate the drain vessel. The drain tube and interlock cable will be attached to
the drain vessel retainer cap.
4. Place the drain vessel in full view on the floor in front of the instrument. Never
place the drain vessel inside a cabinet.
5. Before connecting the drain tube to the burner assembly, if necessary pour
about 250 mL of water into the free end of the drain tube to fill the drain loop
and to activate the drain float.
6. Place the hose clamp over the free end of the drain tubing.
7. Carefully install the free end of the drain tubing over the drain outlet, making
sure that the inner Teflon lining of the drain tube does not get damaged.
8. Use a flat-blade screwdriver to tighten the hose clamp.
9. Plug the white drain interlock connector into the drain interlock plug on the
burner assembly as shown in the figure below.
Caution
When installing the free end of the drain tubing over the drain outlet, take
care not to damage the inner Teflon lining of the drain tube.