PerkinElmer PINAACLE 900 Series, Руководство по оборудованию и обслуживанию для клиентов

Страница: 264 / 390

248
Maintenance
1. Take the burner system apart.
2. Inspect the large o-ring located in the neck of the burner chamber. Carefully
lever the o-ring out of the neck of the burner chamber using a plastic pipette tip
or the like.
3. Place the large o-ring back into the neck of the burner chamber and press it
down with your finger.
4. Inspect the four smaller o-rings and the large o-ring located in the burner end
cap. Very carefully pry them out and inspect the o-rings for nicks, cuts and
deterioration . Replace the o-rings as needed.
5. Examine the o-rings. If they are is damaged, replace them.
6. Gently place the o-rings back into the end cap and then press them into place
with your finger.
7. Reassemble the burner system.
Nebulizer O-Rings
There are o-rings on the nebulizer. Always carefully check the condition of these
o-rings whenever you take the nebulizer apart.
Warning: Flammable Gases - Fire and Explosion Hazard
If the o-rings in the burner system are damaged or have deteriorated, they
may no longer form a proper seal. This may result in a gas leak which is
a serious fire hazard.
Check the condition of the o-rings regularly and replace them if they are
damaged or show signs of deterioration.
Note
Never use sharp or pointed tools to remove the o-ring. Examine the o-ring.
If it is damaged, replace it.
!
Warning