PerkinElmer PINAACLE 900 Series, Руководство по оборудованию и обслуживанию для клиентов

Страница: 329 / 390

313
Graphite Furnace Maintenance for the PinAAcle 900H
To install the left-hand contact:
1. Slide the long arm of the plastic alignment gauge and the replacement left-hand
(short) contact onto the bolt, so that the contact fits in the ring in the gauge.
2. Pass the bolt from the internal side through the left-hand furnace block and out
through the window cavity.
3. Screw the traction nut with its short side toward the furnace block onto the free
end of the bolt.
Position the traction nut so that the flat side on the rim is facing up.
4. Carefully turn the bolt clockwise with the ratchet wrench provided to draw the
contact into the furnace block. Make certain that the contact is not tilted.
5. Disassemble and remove the installation tool.
Take care not to scratch or damage the contact.
6. Now install a new right-hand contact.
Note
Draw the contact firmly into place, but do not apply excessive force
otherwise the contact may shatter.