PerkinElmer PINAACLE 900 Series, Руководство по оборудованию и обслуживанию для клиентов

Страница: 159 / 390

143
Installing the Sample Capillary
Table 4-2. Sample cups and reagent containers
• Polypropylene containers are suitable for organic solvents
Installing the Sample Capillary
To avoid any damage to the sample capillary during shipment, the sample capillary
will have to be removed from the pipette arm assembly.
To install the sample capillary:
1. Carefully remove any tape used for holding the capillary during transportation.
2. Push the metal mount of the sample capillary into the clip at the end of the
pipette arm. Make sure that the sharp side of the metal mount goes first.
3. Pass the sample tube through the hooks on the pipette arm such that it forms a
smooth loop from the metal mount.
4. Pass the sample tube around the hooks on the sample table, leaving a
sufficiently large loop so that the pipette arm can move freely.
Filling and Flushing the Rinsing System
The quality of the rinsing and sample delivery system of the AS 900 autosampler
is most important to achieve good analytical results. Flushing is necessary after all
alterations to the system (e.g. new sample capillary). after changing the sample
Cup or container 88-location tray 148-location tray
volume, material locations locations
1.2 mL; polypropylene not suitable 1–120
122, 123, 125, 127, 128,
130, 132, 133, 135, 137,
138, 140
2.5 mL; polypropylene 1–80 121, 124, 126, 129, 131,
134, 136, 139
7 mL; polypropylene 81–88 141–148