PerkinElmer PINAACLE 900 Series, Руководство по оборудованию и обслуживанию для клиентов

Страница: 109 / 390

93
Specifications
Graphite Furnace Atomizer
Burner System: This system has a stacked design, with flame unit on the top,
and graphite furnace at the bottom. The burner is equipped
with a high-strength inert mixing chamber, angled to ensure
proper drainage. Depending on the type of analysis you can
use either the high sensitivity corrosion-resistant plastic
nebulizer and stainless steel nebulizer. There are separate part
numbers for the plastic or stainless steel nebulizers.
Graphite Furnace Atomizer Description
PinAAcle 900H Built-in fully computer-controlled Heated Graphite Atomizer
(HGA™).
PinAAcle 900T and
PinAAcle 900Z Built-in fully computer-controlled Transversely Heated
Graphite Atomizer (THGA™). The graphite tube is
transversely heated providing a uniform temperature profile
over the entire tube.
PinAAcle 900H, PinAAcle
900T and PinAAcle 900Z An external protective gas stream around the graphite tube
prevents the entrance of outside air to maximize tube life. An
internal purge gas goes through the graphite tube to remove the
volatilized matrix vapors during drying and thermal
pretreatment. The two gas streams are computer-controlled
independently. Pneumatic opening and closing of the furnace
for easy tube change.
Common Furnace Features: Program Flexibility: Analytical programs with up to 12 steps
can be set up. Each step can be programmed with the following
parameters:
Temperature: Ambient up to 2600 °C (up to 2700 °C with HGA) in steps of
10 °C.
Flame Atomizer Description