PerkinElmer PINAACLE 900 Series, Руководство по оборудованию и обслуживанию для клиентов

Страница: 189 / 390

173
Installing Sample Trays
• If you install more than one lamp containing a particular element, for example,
a single-element copper lamp and a multi-element lamp containing copper, the
system will use the lamp in the holder with the lower number when you
perform determinations of that element. Make sure that you place the preferred
lamp in the holder with the lower number.
• With EDLs, connect each lamp plug to the socket that has the same number as
the holder of the lamp.
• With EDLs, make sure that you use the correct coding plug and connect it to
the receptacle on the lamp holder containing the EDL.
• If you use the wrong coding plug or connect the coding plug to the wrong
receptacle, you will cause the spectrometer to malfunction and may cause
irreparable damage to the lamp.
Installing Sample Trays
The sample tray can be inserted at the front of the instrument. You cannot install
the tray if the furnace autosampler is installed. If the furnace autosampler is
swiveled to the standby position you can then install a sample tray. There are two
positions for the flame sample tray, one at the top position, which is the normal
position, and another at the lower position.
1. Take the sample tray, place the drain hose in the notched area of the tray.
2. Slide the tray into place on the tray supports.