Pazzles Mini Creative Cutter, Руководство пользователя

Страница: 61 / 140

Chapter 4 Creative Cutter Tutorials
Creative Cutter MINI 53
2 The Summer Sun image should appear in the work space As shown in figure 78..
Figure 78
TIP: Be sure to drag a box around the entire sun to catch the inside parts and the outside parts.
3
Resize the sun if needed by clicking on a corner box. While holding the mouse button down,
push in or pull out to resize the sun.
Figure 79
Weld the Title and the Image
1 Move the summer sun image so that it overlaps the Summer title.
TIP: To move the image, hover the Select Elements tool over the image until it changes into
the Move tool.
NOTE: If you leave parts behind, first click UNDO to void your last action. Then drag a
box around the sun to grab all the part
2 Select the outsides only of the sun and the title Summer. To do so, click the outline of the
sun with the Select Elements tool. Then, while holding down the
SHIFT
key on your keyboard,
click on the outside the of the title Summer. Boxes should then surround Summer and the sun,
as shown in figure 80..