Pazzles Mini Creative Cutter, Руководство пользователя

Страница: 131 / 140

Chapter 7 Specialized Cutting and Finishing Techniques
Creative Cutter MINI 123
3 In the Pen/Brush window, select KissCut1 or KissCut2 and then click Apply .
TIP: Remember to change back to a solid line before you type or draw. If you don’t, your lines
will continue to be KissCut style.
Figure 169
Cutting With the Creative Cutter Pen Tool
The Creative Cutter pen tool is designed to work with Sakura Gelly Roll pens.
Step 1: Insert the Pen Into the Holder and Into the Cutter
1 To insert the pen into holder, loosen the white thumbscrew and push a Sakura Gelly pen all
the way in. Note that some pens are slightly thicker than others but become easier to insert over
time. If the pen is difficult to insert, try rubbing it with sandpaper to to allow it to insert into the
pen tool.
2 Insert the pen holder into the carriage of the Creative Cutter, using the same opening as for
the bladeholder.
3 Verify that the lip of the pen holder is seated flush to the opening.
4 Tighten the white thumbscrew to secure the pen holder in place.
IMPORTANT: Do not overtighten the thumbscrew.
NOTE: These same steps can be used with the marker tool as well.
Step 2: Using the Pen
1 Open any of the Creative Cutter images or create your design in Pazzles Creative Cutter.
Because you are not cutting paper, you can choose images that have intersecting lines.
2 Place paper on the cutting mat and insert it into the cutter.
3 Open Cutting panel in Pazzles Creative Cutter and set the pressure to approximately 100.