Pazzles Mini Creative Cutter, Руководство пользователя

Страница: 137 / 140

Chapter 8 Troubleshooting Guide
Creative Cutter MINI 129
The program aborts or generates a
run-time error Generally there are a few very common reasons for a runtime error. All
of these are easily avoidable once you know what they are.
Issue: You are using software version Letter 14.0 and are trying to
open files for version 2005.
Solution : Make sure you open the cutting file folder that says 12.0 or
14.0.
Issue: You are using software version Letter 2005 and are trying to
open files created in an older version of the program.
Solution : If your files are not in a folder marked _05, they are in the
old version. You must import those files into the 2005 version.
Issue: You are trying to outline and you choose multiple outlines.
Solution : Three is the maximum safe number of outlines. After three,
click on the outermost outline and do the outline function again.
Issue: You are trying to outline and you have chosen TOO large of an
outline.
Solution : Reduce the size of the outline.
Issue: The memory in your computer is full. The program tries to
remember every move you make so that you can use the Un-Do
function.
Solution : Clean the memory by going to HELP and choosing Clean
Memory , OR go to the Setting menu and select SET UP . On the
Document page, click Undo and change the number of saved steps to
10 or fewer.
Issue: Errors occur when you have open paths. These are points next to
each other that should be joined.
Solution : Use the Show Open Paths tool to find the problem. It
appears on the bottom of the toolbar on the right side of the screen. It
has a question mark beside a line with two dots. Then close the open
paths with the Join two points tool. See “Break and Move Tool” on
page 99 and “Join Two Points Tool” on page 100.
Issue Possible Causes and Remedies