Pazzles Mini Creative Cutter, Руководство пользователя

Страница: 17 / 140

Chapter 2 Installation and Setup
Creative Cutter MINI 9
Determine the Port the USB to Serial Was Assigned To
Complete these steps after installing the USB to Serial Converter (See INSTALL THE USB
DRIVER) section if you have not already done so.
1 Go to Start at the bottom-left corner or your screen and click on it.
2 Find My Computer and RIGHT-click on it. When you do, a menu opens.
3 Click on Manage.
4 Click Device Manager .
5 Click Ports to view a list of ports see figure 6 .
6 From the list of ports, look for a USB Serial Port. Take note of the port number assigned to
it. You will use the port number when setting up the plotter codes in the Cutting Program. If the
number is higher than 6, you must change it using the
“Change Port Number” procedure that
follows these instructions.
Figure 6
Change the Port Number
Use this procedure if the port number is higher than 6.
1
Double-click on the port to open the Port Properties screen.
2 Click on the Port Settings tab.
3 Click on the Advanced button.