Panasonic ZEQUO 6400, Руководство по эксплуатации

Страница: 215 / 1058

19. Didital Diagnostic Monitoring (DDM) Commands
216
19.12. show ddm ports configuration
 Description
This command is used to display the current configurations of the optic modules. There are
two types of thresholds: the administrative configuration and the operation configuration
threshold.
For the optic port, when a particular threshold was configured by the user, it will be shown
in this command with a tag indicating that it is a threshold that the user configured, else it
would be the threshold read from the optic module that is being inserted.

Format
show ddm ports {<portlist>} configuration
 Parameters
 Restrictions
None.
 Example
To show port 21's configuration:
ports
<portlist>
Specifies a range of ports to be displayed.
If the port parameter is not specified, all optic ports' operating parameters will be
displayed.
Zxxx0:admin# show ddm ports 21 configuration
Command: show ddm ports 21 configuration
Port 21
-----------------------------------
DDM State : Enabled
Shutdown : Alarm
Threshold Temperature Voltage Bias-Current TX-Power RX-Power
(in Celsius) (V) (mA) (dBm) (dBm)
------------- ------------ ------------ ------------ ------------ ------------
High Alarm 85.0000(A) 3.5000 100.0540 -8.9997 -2.9904
Low Alarm -5.0000 3.1000 6.0040 -11.8977 -23.9794
High Warning 80.0000(A) 3.4500 90.0480 -9.5001 -3.4901
Low Warning 0.0000 3.1500 7.0040 -11.4026 -23.0103
A means that the threshold is administratively configured.
Zxxx0:admin#